Pneumatic fluorine butterfly valve
Nominal diameter: DN50 ~ 1000mm
Nominal pressure: PN0.6 ~ 1.6MPa
Body material: ductile cast steel, cast steel, stainless steel + F46
Applicable temperature: -30 ~ +70 ℃
Applicable medium: all kinds of strong corrosion media
design criteria: GB / T2238-1989
flange size: GB / T9113.1-2000; GB / T9115.1-2000 ; JB78
length of the structure: GB / T12221-1989
pressure test: GB / T13927-1992; JB / T9092-1999
First, the pneumatic lining fluorine flange butterfly valve product overview
Pneumatic fluorine fluorine butterfly valve with a spherical sealing surface of PTFE-lined butterfly plate, pneumatic fluorine fluorine butterfly valve operation light, tight sealing performance, long service life; can be used for rapid cut off or regulate the flow of use. Pneumatic butterfly valve PTFE lining is required for reliable sealing and good regulation of the occasion. The valve body adopts the split type, and the seal at the two ends of the valve shaft is controlled by the fluorinated rubber on the rotating base surface between the valve disc and the valve seat; the valve shaft is not in contact with the fluid medium in the cavity. PTFE pneumatic butterfly valve is widely used in various types of industrial pipes in the liquid and gas (including steam) transport, the use of serious corrosive media, such as: sulfuric acid, hydrofluoric acid, phosphoric acid, chlorine, alkali, Wang Water and other media with strong corrosive.
Fluoride-lined butterfly valve with PTFE, FFC, F46 and Fluoroplastics lined butterfly valves with corrosion resistance, no leakage and long service life. Lined PTFE pneumatic butterfly valve for concentrated sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, aqua regia, a variety of organic acids, acid, oxidizing medium or high temperature olefin acid, high temperature concentrated acetic acid, acid and alkali alternating and a variety of organic solvents and other Strong corrosive media.
Pneumatic fluorine butterfly valve main features:
1, small and lightweight, easy disassembly and maintenance, and can be installed in any location.
2, the structure is simple, compact, 90 ° turn quickly open. 3
3, operating torque, light and labor-saving.
4, flow characteristics tend to be straight, good performance.
5, sealing material aging resistance, corrosion resistance, applicable to a variety of media.
Second, pneumatic lining fluorine butterfly valve main technical parameters
1, the valve body
Body form | Direct casting butterfly valve |
---|---|
Nominal diameter | DN50 ~ 1000mm |
Nominal pressure | PN1.0, 1.6 MPa |
Flange standard | JIS B220, JB / T79, ANSI B16.5-1981, GB / T9113, HG20594-97, HG20618-97, etc. |
Connection Type | Flange, the folder-type |
Cover form | Integrated |
Gland type | Gland compression |
Sealed packing | V-type PTFE filler, flexible graphite filler |
2, the valve parts
Valve plate form | Vertical plate (butterfly) |
---|---|
Flow characteristics | Linear |
3, the implementing agency
Actuator model | GT series, SR series, AT series, AW series of single-and double-acting pneumatic actuator |
---|---|
Supply pressure | 400 ~ 700KPa |
Air source interface | G1 / 4 ", G1 / 8", G3 / 8 ", G1 / 2" |
Ambient temperature | -30 ~ +70 ℃ |
The role of form |
Single-acting actuator: Off Gas formula (B) - loss of gas when the valve opening (FO); open air (K) - loss of gas when the valve closed position (FC) double acting actuator: Off Gas formula (B ) - Leakage valve position to maintain (FL); open air (K) - loss of valve position to maintain (FL) |
Can be equipped with accessories | Positioner, Solenoid valve, Air filter pressure reducer, Relief valve, Stroke switch, Valve position transmitter, Hand wheel mechanism, etc. |
Third, pneumatic lining fluorine butterfly valve main performance indicators
Nominal diameter | DN (mm) | 50 ~ 1600 | ||
---|---|---|---|---|
Nominal pressure | PN (MPa) | 0.6 | 1.0 | 1.6 |
test pressure | Strength test | 0.9 | 1.5 | 2.4 |
Seal test | 0.66 | 1.1 | 1.76 | |
Gas seal test | 0.6 | 0.6 | 0.6 | |
Suitable media | Various types of corrosive media |
Four, pneumatic lining fluorine butterfly valve shape connection size
Nominal diameter DN (mm) | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 700 | 800 | 900 | 1000 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
L | 90 | 90 | 100 | 115 | 130 | 140 | 150 | 250 | 270 | 290 | 310 | 330 | 350 | 390 | 430 | 470 | 500 | 550 | |
L1 | 43 | 46 | 49 | 56 | 64 | 70 | 71 | 76 | 83 | 92 | 102 | 113 | 127 | 154 | 165 | 190 | 203 | 216 | |
H | Flanged | 63 | 70 | 83 | 105 | 115 | 137 | 164 | 206 | 230 | 248 | 289 | 320 | 343 | 413 | 478 | 525 | 585 | 640 |
Clip-on | 63 | 70 | 83 | 105 | 115 | 137 | 164 | 206 | 230 | 248 | 289 | 320 | 343 | 413 | 478 | 525 | 585 | 640 | |
n-φd | 4-18 | 4-18 | 8-18 | 8-18 | 8-18 | 8-22 | 12-22 | 12-26 | 12-26 | 16-26 | 16-30 | 20-30 | 20-33 | 20-36 | 24-36 | 24-39 | 28-39 | 28-42 | |
H1 | According to the allocation of implementing agencies may be | ||||||||||||||||||
A | Depending on the torque required by the valve, the configuration of different models, dimensions are not the same | ||||||||||||||||||
D | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 | 520 | 580 | 640 | 715 | 840 | 910 | 1025 | 1125 | 1255 | |
D1 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 355 | 410 | 470 | 525 | 585 | 650 | 770 | 840 | 950 | 1050 | 1170 |
Note: the size of the table without standard attachment data. The other due to product improvement technical innovation parameters may have some changes, please consult the company's technical department for the latest data.